TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 420 of 592

TM 9-2320-209-34-2-3

FRAME 7

CAUTION

1.

2.

3.

Fuel flow and leak tests must be done with fuel control

valve in position it normally works in. Fuel used must

be of type normally used. Failure to do this could

result in a wrong measurement, causing serious damage

to equipment.

Join fuel supply line (1) to fuel inlet fitting (2).

Using suitable electrical lead (3), join shutoff electrical lead (4) and restrictive

electrical lead (5) together.

Join other end of lead (3) to pin B (6) of wiring

harness connector (7).

Using suitable electrical lead (8), join body of fuel control valve (9) to

pin A (10) of wiring harness connector (7).

GO TO FRAME 8

21-85