TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 414 of 592

TM 9-2320-209-34-2-3

e.

Disassembly, Inspection, Repair, Assembly, and Test of Fuel Control Valve.

FRAME 1

1.

2.

3.

4.

5.

6.

CAUTION

Do not dip fuel control valve

ing solvent. Electrical parts

by doing so.

(1) in dry clean-

may be damaged

Wipe fuel control valve (1) clean with a clean cloth dipped in dry cleaning

solvent, wipe fuel control valve dry.

Check that fuel control valve (1) has no cracked or broken parts. If

cracks or breaks are found, do step 6.

Check that electrical leads (2, 3, 4, 5, 6, and 7) have no broken or

frayed insulation or damaged connectors on ends. If any electrical leads

or connectors are damaged, do step 6.

Using ohmmeter, check continuity through heater by placing one ohmmeter

lead on terminal (8) and other ohmmeter lead on terminal (9). Circuit

should be closed. If circuit is open, do step 6.

If fuel control valve (1) passes tests, go to frame 2. If you must get new

fuel control valve, do step 6.

NOTE

Electrical leads (2 and 7) must be used on new fuel

control valve (1).

Unscrew and take off nut (10). Take off electrical lead (2) and slide

off electrical lead (7).

Get new fuel control valve (1).

END OF TASK

21-79