TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 80 of 592
TM 9-2320-209-34-2-3
FRAME 2
Soldier A 1.
Soldier B 2.
3.
Soldier A 4.
Soldier B 5.
Soldier A 6.
Soldier B 7.
Soldiers 8.
A and B
9.
END OF TASK
Put a load (1) on end of cable (2).
Put winch clutch lever (3) toward center of truck.
Check that drum lock knob (4) is in unlocked position.
Start winch. Refer to TM 9-2320-209-10.
Put winch clutch lever (3) toward right side of truck.
Raise load (1) with winch, then stop winch. Refer to
TM 9-2320-209-10. Winch must hold load.
If winch does not hold weight (1), tighten adjusting screw (5)
1/2 turn.
Do steps 2 through 6 again until winch holds load (1).
If automatic brake overheats, loosen brake adjusting screw (5)
1/2 turn.
18-69
Back to Top
