TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 79 of 592
TM 9-2320-209-34-2-3
h.
Test.
FRAME 1
Soldier A
Soldier B
Soldiers
A and B
WARNING
Always wear leather gloves when handling winch cable.
Never allow cable to run through hands. Rusty or
broken wires can cause serious injury to personnel.
NOTE
Test rear winch mounted on the truck.
To operate
winch, refer to TM 9-2320-209-10.
1.
2.
3.
4.
5.
Pull out drum lock knob (1) and turn it 90° to the unlocked
position.
Put drum clutch lever (2) toward center of truck.
Pull on cable (3) and then stop pulling.
Check that winch drum stops turning. If winch keeps turning,
turn adjusting screw (4).
Do steps 3 and 4 until winch drum stops turning when cable (3)
GO TO FRAME 2
is no longer pulled.
18-68
Back to Top
