TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 76 of 592
TM 9-2320-209-34-2-3
FRAME 12
1.
Put fitting (1) on sprocket (2).
2.
Press bushing (3) on sprocket (2), alining pin holes.
3.
Put sprocket (2) on hub (4) and hold it in place.
4.
Put two retaining rings (5) on hub (4).
5.
Put hub (4) with bushing (3) and sprocket (2) on shaft (6), alining holes.
6.
Put straight pin (7) through sprocket (2), bushing (3), and hub (4).
7.
Put in expansion plug (8).
8.
Put shear pin (9) through hub (4) and sprocket (2).
9.
Put in cotter pin (10).
10.
Grease rear winch sprocket.
Refer to LO 9-2320-209-12/1.
END OF TASK
18-65
Back to Top
