TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 69 of 592
TM 9-2320-209-34-2-3
FRAME 5
1.
If sleeve bearing (1) was taken out, press new bearing into gearcase cover (2).
2.
Place gasket (3) and gearcase cover (2) on gearcase (4). Aline mounting holes.
3.
Put on four capscrews (5).
4.
Put nuts (6 and 7) on tie rod (8).
5.
Thread tie rod (8) on gearcase (4).
Tighten nut (6) and lock tie rod to gearcase.
GO TO FRAME 6
18-58
Back to Top
