TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 61 of 592
TM 9-2320-209-34-2-3
FRAME 4
1.
Check that machined surface on cover (1) and gearcase (2) where gasket (3) is placed
has no nicks, burrs or old gasket material.
2.
Check that machined surface on bearing cap (4) and gearcase (2) where gasket (5) is
placed has no nicks, burrs or old gasket material.
3.
Check that machined surface on brake housing (6) and gearcase (2) where gasket (7)
is placed has no nicks, burrs or old gasket material.
4.
Check that machined surface on cover (8) and brake housing (6) where gasket (9) is
placed has no nicks, burrs or old gasket material.
5.
Take off any old gasket material,
and rub off any nicks or burrs with a honing stone.
GO TO FRAME 5
18-50
Back to Top
