TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 56 of 592
TM 9-2320-209-34-2-3
FRAME 9
1.
Take out capscrew (1), washer (2), and retaining washer (3).
2.
Pull drive worm brake disk (4) out of housing (5).
3.
Take out key (6) from shaft (7).
4.
Take out four capscrews and washers (8).
5.
Take off housing (5) and gasket (9).
NOTE
Do not take out oil seal (10) unless it is damaged. Refer to
para 18-4e for inspection procedures.
6.
Press out oil seal (10).
GO TO FRAME 10
18-45
Back to Top
