TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 65 of 592
TM 9-2320-209-34-2-3
f.
Assembly.
FRAME 1
1.
2.
3.
4.
5.
6.
7.
GO
Hold drum shaft gear (1) and shaft (2), alining two keys (3) in shaft with
keyway in hub of drum shaft gear.
Press shaft (2) through drum shaft gear (1) until keys (3) are seated in drum
shaft gear hub.
If oil seal (4) was taken out, press new oil seal into gearcase (5).
Press bearing (6) into gearcase (5).
Put drum shaft gear (1) with shaft (2) into gearcase (5).
Place bearing (7) in gearcase (5). Slide drive worm (8) into gearcase from
the other side. Mesh drive worm with drum shaft gear (1).
Aline drive worm (8) with bearing (7) and hold in place. Using a soft-faced
hammer, tap drive worm. Seat bearing in gearcase (5).
TO FRAME 2
18-54
Back to Top
