TM-9-2320-260-10

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 1985

TM-9-2320-260-10 - Page 105 of 411

2-60

Change 4

TM 9-2320-260-10

Table 2-2. Preventive Maintenance Checks and Services (Cont’d).

ITEM

NO.

INTERVAL

ITEM TO

CHECK/

SERVICE

CREWMEMBER

PROCEDURE

NOT FULLY

MISSION

CAPABLE IF:

LOCATION

DRIVER

30

During

Front

a.

Check winch hoses and lines for

a.

Any class III

Winch

deterioration, leakage, and secure

leak is evident.

connections.

b.

With engine running, operate front

b.

Vehicle is not

winch, check that drum lock knob

ready/available if

(2) and drum clutch lever (1) operate

mission requires

properly. Also, check that winch grab

winching operation

brake stops drum from revolving as

and winch is

soon as cable pull is stopped.

inoperable. M816

will be ready/

available only if rear

winch can be used.

Notify unit

maintenance if front

winch cannot be

operated properly.

INTERIOR OFVEHICLE

DRIVER

31

After

Seat and

a.

Check driver’s (4) and companion

Seatbelts

(3) seats for security of mounting.

WARNING

Wear hand protection when handling

winch cable. Do not handle cable

with bare hands. Broken wires will

cause injuries.

NOTE

Missing, torn, or inoperative seatbelt

may be in violation of AR 385-55.

2

1