2-64
Change 4
TM 9-2320-260-10
Table 2-2. Preventive Maintenance Checks and Services (Cont’d).
ITEM
NO.
INTERVAL
ITEM TO
CHECK/
SERVICE
CREWMEMBER
PROCEDURE
NOT FULLY
MISSION
CAPABLE IF:
LOCATION
DRIVER
38
After
Surge Tank
Check coolant level in surge tank (2).
Tank should be filled to approximately
bottom end of fill tube (1) before
operation. Fill if necessary.
DRIVER
39
After
Engine
Withdraw dipstick (3) slowly to ensure
Engine is over-
Oil Level
an accurate reading. Check for proper
filled.
oil level. Level should be between
L (low) and H (high) marks. Add oil
as necessary (LO 9-2320-260-12).
.
WARNING
.
Accidental or intentional introduc-
tion of liquid contaminants into the
environment is in violation of state,
federal, and military regulations.
Refer to Lubrication Order (para. 3-4 )
for information concerning storage,
use, and disposal of these liquids.
Failure to do so may result in injury
or death.
CAUTION
Do not overfill. Damage to internal
engine components will result.
NOTE
Engine oil level is checked after
engine is stopped and dipstick is
removed and wiped clean.
LUBRICANTS
OE/HDO 10
OE/HDO 10
OE/HDO 10
OE/HDO 10
Above 15°F
+40 TO -15°F
+40 TO -65°F
(Above -9°C)
(+4 TO -26°C)
(+4 TO -54°C)
EXPECTED TEMPERATURES
1
2