TM-9-2320-260-10

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 1985

TM-9-2320-260-10 - Page 116 of 411

Change 4

2-70.1

TM 9-2320-260-10

Table 2-2. Preventive Maintenance Checks and Services (Cont’d).

ITEM

NO.

INTERVAL

ITEM TO

CHECK/

SERVICE

CREWMEMBER

PROCEDURE

NOT FULLY

MISSION

CAPABLE IF:

LOCATION

DRIVER

50

After

Wrecker

Check hydraulic oil level with dipstick

Any class III leak

Crane

in filler cap (3). Oil level should be at

is evident.

FULL mark. If low, add as necessary

(LO 9-2320-260-12).

DRIVER

51

After

Van

Check hydrayulic reservoir level by

Any class III leak

Hydraulic

removing filler cap (4) and pulling out

is evident or cap

Liftgate

dipstick (5). Oil level should be at the

missing.

third mark from top of gauge, with

liftgate up in traveling position.

If oil level is low, fill to top line

(LO 9-2320-260-12). After check,

ensure engine filter cap (4) is tight.

CAUTION

• Before opening reservoir, ensure

area around the reservoir cap is

clean. Do not allow dirt, dust, or

water to enter reservoir. Failure to

do so will cause damage to

internal components.

• Do not overfill hydraulic oil

r e s e r v o i r. Damage to internal

components will result.

3

4

5