TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1028 of 1337

para. 13-17

TM 9-2320-260-20

I

13-23. REAR WINCH DRIVESHAFT HOUSING MAINTENANCE

(Contd)

I

1. Install lubrication fitting (15) on driveshaft housing (3).

2. Install spacers (9) and (19) on covers (12) and (20).

3. Install driveshaft (14) into driveshaft housing (3) with two bearings (7) and (22), new oil

seals (13) and (21), new gaskets (8) and (16), covers (12) and (20), four new lockwashers (11) and

(17), and screws (10) and (18).

1. Position rear winch driveshaft housing (3) cm yoke (4).

2. Install spacers (5) and rear winch driveshaft housing (3) on mounting bracket (6) with four

screws (2) and new locknuts (1). Tighten locknuts (1) 44-61 lb-ft (60-83 N•m).

13-55