TM 9-2320-260-20
Table 2-1. Unit Level Preventive Maintenance Check and Services (Contd).
ITEM
INTERVAL
ITEM TO
CHECK/
PROCEDURE
NOT FULLY
No.
MISSION
SERVICE
CAPABLE IF:
32
Semi-
Power
a.
Inspect power divider (2) for oil leaks, cracks, and
Any class III leak.
annual
divider
loose screws that may cause leaks. Notify your
(M-816)
supervisor if leaks or cracks are found.
b.
Service power divider (2) annually or every 12,000
mi (19,308 km), whichever occurs first.
c.
Change lubricant only when required by mainten-
ance repair action, or if contaminated by water or other
foreign material. Drain only after operation when hot.
Place vehicle in level position. Remove filler plug (3) and
drain plug (4) from case, and after draining, reinstall
drain plug (4). Fill power divider (M816) within 1/2 in.
(12.7 mm) of filler plug (3) opening, when lubricant is
cold, or to plug level when hot. Install filler plug (3).
2-23