TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 807 of 1337

11-26

TM 9-2320-260-20

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICA8LE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Five locknuts

EQUIPMENT CONDITION

External-tooth lockwasher

Parking brake set (TM 9-2320-260-10).

1.

Remove three screws (9), washers (8), locknuts

(11),

and front shield (10) from fender support

shield (7) and side shield

(13).

Discard locknuts

(11).

2. Remove screw (5), two washers (6), and locknut (12) from side shield (13). Discard locknut (12).

3.

Remove locknut (4), alternator ground cable connector (3), external-tooth lockwasher (2),

screw (15), washer (14), and side shield (13) from frame (16) and fender (1). Discard locknut (4)

and lockwasher (2).

1. Install side shield (13) on fender (1) and frame (16) with screw (15), washer (14), new external-tooth

lockwasher (2), alternator ground cable connector (3), and new locknut (4).

2. Install top of side shield (13) on frame (16) with screw (5), two washers (6), and new locknut (12).

3. Install front shield (10) on fender support shield (7) and side shield (13) with three screws (9),

washers (8), and new locknuts (11).

11-48