TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 948 of 1337
TM 9-2320-260-20
12-54. FUEL CAN BRACKETS REPLACEMENT
THIS TASK COVERS:
a. Removal b. Installation
INITIAL SETUP
APPLICABLE MODELS
M816
REFERENCES (TM)
TM 9-2320-260-10
MATERIALS/PARTS
TM 9-2320-260-20P
Eleven locknuts
EQUIPMENT CONDITION
Two lockwashers
Parking brake set (TM 9-2320-260-10).
1. Remove four locknuts (9), screws (2), and bracket assembly (3) from mounting bracket (7). Discard
locknuts (9).
2. Remove two screws (4), lockwashers (5), and washers (6) from mounting bracket (7), angle
bracket (10), and oil filter housing (12). Discard lockwashers (5).
3. Remove four locknuts (13), screws (14), and mounting bracket (7) from angle bracket (10). Discard
locknuts (13).
4. Remove three locknuts (11), screws (8), and angle bracket (10) from fuel can (1). Discard
locknuts (11).
1. Install angle bracket (10) on fuel can (1) with three screws (8) and new locknuts (11).
2. Install mounting bracket (7) on angle bracket (10) with four screws (14) and new locknuts (13).
3. Install two screws (4), new lockwashers (5), and washers (6) on mounting bracket (7), angle
bracket (10), and oil filter housing (12).
4. Install bracket assembly (3) on mounting bracket (7) with four screws (2) and new locknuts (9).
12-111
Back to Top
