TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 941 of 1337

TM 9-2320-260-20

12-50. FRONT SPLASH GUARD REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M816

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Seventeen locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

a. Removal

1. Remove five locknuts (11), screws (8), retainer (9), and lower splash guard (10) from upper splash

guard (7). Discard locknuts (11).

2. Remove six locknuts (12), screws (6), and three brackets (13) from upper splash guard (7). Discard

locknuts (12).

3. Remove three locknuts (1), screws (5), and brackets (13) from frame (3). Discard locknuts (1).

4. Remove three locknuts (4), screws (2), and upper splash guard (7) from frame (3). Discard

locknuts (4).

1.

Install upper splash guard (7) on frame (3) with three screws (2) and new locknuts (4).

2. Install three brackets (13) on frame (3) with three screws (5) and new locknuts (1).

3. Install three brackets (13) on upper splash guard (7) with six screws (6) and new locknuts (12).

4. Install lower splash guard (10) on upper splash guard (7) with retainer (9), five screws (8), and new

locknuts (11).

12-104