TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 939 of 1337

TM 9-2320-260-20

I

12-49. REAR SPLASH GUARD REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M816

TM 9-2320-260-10

MATERIALS/PARTS

Thirteen locknuts

TM 9-2320-260-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Remove five locknuts (11), screws (10), retainer (8), and lower splash guard (9) from upper splash

guard (13). Discard locknuts (11).

2.

Remove two locknuts (12), screws ( 15), and braces (14) from upper splash guard (13). Discard

locknuts (12).

3. Remove two locknuts (7), screws (5), washers (6), and braces ( 14) from frame (3). Discard

locknuts (7).

4. Remove four locknuts (1), screws (4), two spacers (2), and upper splash guard (13) from frame (3).

Discard locknuts (1).

b. Installation

1. Install two spacers (2) and upper splash guard (13) on frame (3) with four screws (4) and new

locknuts (1).

2. Install two braces (14) on frame (3) with two screws (5), washers (6), and new locknuts (7).

3. Install two braces (14) on upper splash guard (13) with two screws (15) and new locknuts (12).

4. Install lower splash guard (9) and retainer (8) on upper splash guard (13) with five screws (10) and

new locknuts (11).

12-102