TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 108 of 863

TM 9-2320-260-34-2

15-15. HOIST CYLINDER MAINTENANCE (Contd)

4. Insert piston rod (11) through hole in crosshead (9) and install with upper crosshead retainer (8),

lower crosshead retainer (10), two new lockwashers (7), and screws (6).

5. Remove chains from hoist cylinder (2) and lifting device.

6. Install two hydraulic hoses (12) on hoist cylinder (2).

FOLLOW-ON TASKS:

Install dump roller arms (para. 15-14).

Fill hydraulic reservoir to proper oil level (LO 9-2320-260-12).

Start engine (TM 9-2320-260-10) and operate dump body through full range.

Check for leaks and proper operation (TM 9-2320-260-10).

15-47