TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 367 of 863

15-82. LOAD CENTER MAINTENANCE (Contd)

NOTE

Perform steps 6 through 10 for M820 and M820A2 vehicles.

6. Position 3-phase receptacle wiring harness (8) in load center (1).

7. Install three wires (5) on 20-amp circuit breaker (3) with three screws (4).

8. Install wire (6) in neutral bar (2) with setscrew (7).

9. Position right and left blackout harnesses (9) and (11) in load center (1).

10. Install wire (15) in neutral bar (2) with setscrew (16).

11. Install wires (13) and (14) on switch (12) with two screws (10).

12. Install wire (18) on relay (17) with screw (19).

15-306

TM 9-2320-260-34-2