TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 375 of 863

15-83. LOAD CENTER CONDUIT REPLACEMENT (Contd)

b. Installation

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

Install conduit (10) on conduit (8) with nut (13), nipple (12), and nut (11).

Install conduit (10) on load center (6) with nut (2), nipple (3), and coupling (9).

Position auxiliary pump wiring harness (4) and converter wiring harness (5) in van body (7). Ensure

auxiliary pump wiring harness (4) and converter wiring harness (5) are routed through conduit (10).

Install cover (14) on load center (6) with six screws (1).

Solder four wires (23) and three wires (16) to connectors (22) and (18).

NOTE

Apply sealing compound to cover.

Install cover (17) on junction box (15) with eight screws (21).

Connect wiring harnesses (19) and (20) to connectors (22) and (18).

Solder three wires (30) to connector (25).

Install new gasket (28) and cover (27) on outlet box (29) with four screws (26).

Connect wiring harness (24) to connector (25).

15-314

TM 9-2320-260-34-2