TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 429 of 863

16-4. FRONT WINCH CABLE TENSlONER MAINTENANCE (Contd)

c. Cleaning and Inspection

1. For general cleaning instructions, refer to para. 2-8.

2. For general inspection procedures, refer to para. 2-9.

3. Inspect tensioner frame (1), two sheaves (2), two bearings (3), four thrust washers (4), bushings (5)

and (6), shaft (7), pin (8), shaft (9), and block (10) for breaks, cracks, bends, chips, scoring, and

excessive wear. Refer to table 16-4, Cable Tensioner Parts Wear Limits, for measurements. Replace

part(s) if damaged or worn.

16-30

TM 9-2320-260-34-2