TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 494 of 863

16-17. HOIST WINCH MAINTENANCE (M816) (Contd)

1.

2.

3,

4.

5.

6,

7.

8.

9.

10.

11.

Remove four screws (5) and lockwashers (6), adapter (27), and gasket (7) from cover (26). Discard

lockwashers (6) and gasket (7).

Remove woodruff key (9) from input shaft (10). Discard woodruff key (9).

Remove ten screws (24), lockwashers (25), cover (26), and gasket (11) from housing (16). Discard

lockwashers (25) and gasket (11).

Remove bearing (12) from cover (26).

Remove input shaft gear (8) and input shaft (10) from housing (16).

Remove input shaft gear (8) from input shaft (10).

Remove snapring (19) from wormshaft (23).

Using puller, remove drive gear (20) from wormshaft (23).

Remove woodruff key (13) from wormshaft (23). Discard woodruff key (13).

Remove four screws (18), lockwashers (17), housing (16), and gasket (15) from gearcase (14). Discard

lockwashers (17) and gasket (15).

Remove bearing (21) and seal (22) from housing (16). Discard seal (22).

16-95

TM 9-2320-260-34-2