TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 698 of 863
TM 9-2320-240-34-2
16-50. POWER DIVIDER GOVERNOR CONTROL VALVE REPLACEMENT
THIS TASK COVERS:
a. Removal (M816)
c. Installation (M819)
b. Removal (M819)
d. Installation (39816)
APPLICABLE MODELS
M816, M819
TOOLS
General mechanic’s tool kit
(Appendix B, Item 1)
MATERIALS/PARTS
Two sleeves (Appendix D, Item 511)
Cotter pin (M816) (Appendix D, Item 40)
Two locknuts (M816) (Appendix D, Item 169)
Two lockwashers (M816) (Appendix D, Item 215)
Two locknuts (M819) (Appendix D, Item 182)
Two locknuts (M819) (Appendix D, Item 171)
MATERIALS/PARTS (Contd
Cotter pin (M819) (Appendix D, Item 40)
Antiseize tape (Appendix C, Item 50)
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-34P-1
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-260-10).
Air reservoirs drained (TM 9-2320-260-10).
GENERAL SAFETY INSTRUCTIONS
Do not disconnect air lines before draining air
reservoirs.
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
a. Removal (M816)
1. Remove air lines (9) and (10) and two sleeves (8) from elbow (7) and adapter (11). Discard sleeves (8).
2. Remove cotter pin (13), control link (16), and two washers (12) from air valve (5). Discard cotter
pin (13).
3. Remove two locknuts (6), air valve (5), two spacers (2), and screws (1) from bracket (18). Discard
locknuts (6).
4. Remove elbow (7) and adapter (11) from air valve (5).
5. Remove breather (3) and bushing (4) from air valve (5).
6. Remove two screws (14), lockwashers (15), and bracket (18) from power divider (17). Discard
lockwashers (15).
M816
16-299
Back to Top
