TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 743 of 863

17-16. PERSONNEL HEATER FUEL CONTROL VALVE MAINTENANCE (Contd)

c Installation

1. Wrap threads of nipple (2) with antiseize tape.

2. Install nipple (2) and elbow (3) on fuel control valve (1).

3. Install fuel control valve (1) on heater housing (5) with four new screw-assembled lockwashers (4).

4. Connect fuel outlet line (6) on fuel control valve (1).

5. Route lead (11) to overheat switch (8) and install with new nut-assembled lockwasher (10).

6. Route three leads (7) to overheat switch (8) and install with new nut-assembled lockwasher (9).

7. Route lead (15) to receptacle (16) and install with new screw-assembled lockwasher (14).

8. Install clamp (18) on ignition control unit (13) with screw (17) and new nut-assembled lock-

washer (19).

9. Position guard (12) on heater housing(5) and install with two dzus fasteners (20).

17-42

TM 9-2320-260-34-2