TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 96 of 863
TM 9-2320-260-34-2
15-14. ROLLER ARM MAINTENANCE
THIS TASK
COVERS:
a. Removal
d. Assembly
b. Disassembly
e.
Installation
c. Cleaning
and Inspection
INITIAL SETUP
APPLICABLE MODELS
M817
TOOLS
General mechanic’s tool kit
(Appendix B, Item 1)
Soft-head hammer (Appendix B, Item 47)
Lifting device
Chain
MATERIALS/PARTS
GAA
grease (Appendix C, Item 14)
REFERENCES (TM)
LO 9-2320-260-12
TM 9-214
TM 9-2320-260-34P-2
EQUIPMENT CONDITION
Dump
body removed (para. 15-13).
GENERAL SAFETY INSTRUCTIONS
Do not operate dump controls when dump
body is
removed.
WARNING
Do not operate dump controls when dump body is removed.
Injury to personnel may result if lift cylinder is operated when
not secured.
NOTE
Both roller arms are maintained the same. This procedure covers
one roller arm.
1.
Attach chain to crosshead
(1)
and lifting device and remove slack from chain.
2.
Remove roller arm (2) from crosshead shaft (3).
15-35
Back to Top
