TM-9-2320-272-23-1
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-1 - Page 1200 of 1313
TWO PRESSURE MODES INDICATED WITH STEADY MODE LIGHTS - Continued
STEP
22.
IS THE PNEUMATIC CONTROLLER IN GOOD CONDITION?
Listen for clicking noise while changing CTIS mode.
T0981DAA
PNEUMATIC
CONTROLLER
(CAB)
Figure 20.
Pneumatic Controller.
CONDITION/INDICATION
IS THE PNEUMATIC CONTROLLER IN GOOD CONDITION?
DECISION
YES - Replace electronic control unit (Volume 5, WP
0813). Go to Step (23) to verify problem is solved.
NO - Replace or repair pneumatic controller (Volume 5, WP
0810). Go to Step (23) to verify problem is solved.
STEP
23.
IS YOUR ORIGINAL PROBLEM STILL PRESENT?
a.
Ensure vehicle is returned to normal operating condition.
b.
Check to see if your original problem still exists.
CONDITION/INDICATION
IS YOUR ORIGINAL PROBLEM STILL PRESENT?
DECISION
YES - Notify supervisor.
NO - Problem fixed.
END OF WORK PACKAGE
TM 9-2320-272-23-1
0144
0144-23/24 blank
Back to Top
