TM-9-2320-272-23-1
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-1 - Page 180 of 1313
LIST OF ABBREVIATIONS AND ACRONYMS - Continued
Table
2.
List of Abbreviations/Acronyms - Continued.
Abbreviation
Definition
STE/ICE
Simplified Test Equipment for Internal Combustion
Engine
TAMMS
The Army Maintenance Management System
TM
Technical Manual
TMDE
Test, Measurement, and Diagnostic Equipment
U/I
Unit of Issue
WP
Work Package
W/W
With Winch
WO/W
Without Winch
XLWB
Extra Long Wheelbase
QUALITY OF MATERIAL
Material used for replacement, repair, or modification must meet the requirements of this manual
(TM
9-2320-272-23). If quality of material requirements are not stated in this maintenance manual, the material must
meet the requirements of the drawings, standards, specifications, or approved engineering change proposals
applicable to the vehicle.
COMMON TOOLS AND EQUIPMENT
Common tools and equipment are issued to field level maintenance personnel for maintaining vehicles. The General
Mechanic's Tool Kit (GMTK) is required for all maintenance tasks. Common tools and equipment should not be used
for purposes other than those prescribed and should be properly stored when not in use. For authorized common
tools and equipment, refer to Modified Table of Organization and Equipment (MTOE), CTA 50-970.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
The Maintenance Allocation Chart (MAC) identifies the authority and responsibility for maintenance tasks listed in
this manual. Tool kits, test equipment, and diagnostic equipment required to perform maintenance tasks listed in the
MAC. The Repair Parts and Special Tools List (RPSTL), TM 9-2320-272-24P, lists special tools and equipment
required to perform maintenance procedures in this manual.
END OF WORK PACKAGE
TM 9-2320-272-23-1
0001
0001-5/6 blank
Back to Top
