TM-9-2320-272-23-1
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-1 - Page 631 of 1313
WINCH WILL NOT HOLD LOAD - Continued
STEP
1.
CAN TORQUE CONTROL LEVER BE SET TO HIGH OR LOW POSITION?
a.
Visually check torque control lever position.
b.
If level is not positioned in HIGH or LOW, reposition lever to HIGH or LOW.
T1050DAA
Figure 1.
Torque Control Lever.
CONDITION/INDICATION
CAN TORQUE CONTROL LEVER BE SET TO HIGH OR LOW POSITION?
DECISION
YES - Go to Step (2).
NO - Repair cable tensioner (Volume 4, WP
0677).
STEP
2.
CAN BRAKE SETSCREW AND WINCH CABLE TENSIONER BE ADJUSTED FOR FRONT AND REAR
WINCH?
a.
Attempt to adjust automatic brake setscrew for front winch (Volume 4, WP
0672).
b.
Attempt to adjust drag brake for front winch (Volume 4, WP
0673).
TM 9-2320-272-23-1
0062
0062-2
Back to Top
