TM-9-2320-272-23-1
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-1 - Page 645 of 1313
REAR WINCH CABLE TENSIONER WILL NOT OPERATE - Continued
STEP
1.
ARE AIR SUPPLY LINES IN GOOD CONDITION?
a.
Check air supply lines for leaks.
T0613DAA
Figure 1.
Rear Winch Cable Tensioner.
NOTE
If air supply lines leaks after tightening fitting, Problem has not been solved.
b.
Tighten any loose fittings.
CONDITION/INDICATION
ARE AIR SUPPLY LINES IN GOOD CONDITION?
DECISION
YES - Go to Step (2) to verify problem is solved.
NO - Replace damaged air lines (Volume 5, WP
0805). Go to Step (2) to verify problem is solved.
STEP
2.
IS YOUR ORIGINAL WINCH PROBLEM STILL PRESENT?
a.
Ensure vehicle is returned to normal operating condition.
b.
Check to see if your original winch problem still exists.
TM 9-2320-272-23-1
0065
0065-2
Back to Top
