TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 1289 of 1417

REMOVAL

NOTE

All floodlight sealed beam lamps and doors are replaced the same way.

1.

Remove three screws (Figure 1, Item 7) and retaining rings (Figure 1, Item 8) from lamp door

(Figure

1,

Item

6).

2.

Separate lamp door (Figure 1, Item 6) from lamp housing (Figure 1, Item 4).

3.

Remove two screws (Figure 1, Item 3) and wires (Figure 1, Item 5) from sealed beam lamp (Figure 1, Item 2).

WARNING

Lamp door retaining clips are under tension and must be removed with firm grip. Failure to

comply may result in injury or death to personnel.

NOTE

Note position of clips for installation.

4.

Remove four retaining clips (Figure 1, Item 1) from lamp door (Figure 1, Item 6).

5.

Remove sealed beam lamp (Figure 1, Item 2) from lamp door (Figure 1, Item 6).

TM 9-2320-272-23-2

0328

0328-2