TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1285 of 1417
COMPOSITE LIGHT LAMP REMOVAL
NOTE
Composite light is off vehicle for this task.
1.
Loosen six screws (Figure 13, Item 8) on composite light body (Figure 13, Item 4).
2.
Remove composite light door (Figure 13, Item 1) and seal (Figure 13, Item 7) from composite light body
(Figure
13,
Item
4).
3.
Remove stoplight lamp (Figure 13, Item 5), blackout marker lamp (Figure 13, Item 6), turn signal lamp
(Figure
13,
Item
2), and parking lamp (Figure 13, Item 3) from composite light body (Figure 13, Item 4).
NOTE
Perform Step (4) for diode configured rear composite lights only.
4.
Remove stoplight lamp (Figure 13, Item 5), blackout marker diode (Figure 13, Item 6), turn signal lamp
(Figure
13,
Item
2), and parking lamp (Figure 13, Item 3) from composite light body (Figure 13, Item 4).
1
2
3
4
5
6
7
8
M8016DAA
Figure 13.
Rear Composite Bulb Removal.
END OF TASK
TM 9-2320-272-23-2
0327
0327-22
Back to Top
