DISASSEMBLY - Continued
3.
Remove two screws (Figure 3, Item 13), retainer (Figure 3, Item 14), and pressure switch (Figure 3, Item 15)
from floodlight housing (Figure 3, Item 3).
4.
Remove two screws (Figure 3, Item 18), lockwashers (Figure 3, Item 17), and switch housing
(Figure 3, Item 16) from floodlight housing (Figure 3, Item 3). Discard lockwashers.
5.
Remove two nuts (Figure 3, Item 1), lockwashers (Figure 3, Item 10), and washers (Figure 3, Item 2) from
floodlight housing (Figure 3, Item 3) and screws (Figure 3, Item 5). Discard lockwashers.
6.
Remove two screws (Figure 3, Item 5), washers (Figure 3, Item 4), four spring washers (Figure 3, Item 6), two
washers (Figure 3, Item 4), floodlight housing (Figure 3, Item 3), and two washers (Figure 3, Item 4) from
mounting bracket (Figure 3, Item 9).
7.
Remove pin (Figure 3, Item 8) and stud (Figure 3, Item 7) from mounting bracket (Figure 3, Item 9).
8.
Remove two spacers (Figure 3, Item 12) and grommets (Figure 3, Item 11) from floodlight housing
(Figure 3, Item 3).
13
14
15
16
3
12
11
3
8
9
10
1
2
3
4
5
6
7
17
18
M8025DAA
Figure 3.
Floodlight Disassembly.
END OF TASK
TM 9-2320-272-23-2
0329
0329-4