TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1344 of 1417
INSTALLATION
NOTE
Male pipe threads must be wrapped with antiseize tape before installation.
1.
Install fuel pressure transducer (Figure 2, Item 2) on fuel pump (Figure 2, Item 3).
2.
Connect fuel pressure transducer connector (Figure 2, Item 4) to harness wire (Figure 2, Item 1).
1
4
2
3
M0220DAA
Figure 2.
Fuel Pressure Transducer Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect battery ground cables. (WP
0350)
2.
Start engine and check fuel pressure gauge for proper operation. (TM 9-2320-272-10)
3.
Install left splash shield. (TM 9-2320-272-10)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-2
0340
0340-3/4 blank
Back to Top
