TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 291 of 1417
STEP
1.
Install transducer, do offset.
a.
Stop vehicle engine (TM 9-2320-272-10).
b.
Remove oil pressure sending unit.
c.
Install pressure transducer TK item 17 (blue stripe) in place of sending unit on engine.
d.
Connect P1 of transducer cable W4 to J1 or J2 on VTM.
e.
Connect P2 of transducer cable to connector on pressure transducer.
T0014DAA
TRANSDUCER
TK ITEM 17
TRANSDUCER
CABLE W4
P1
Figure 1.
STE/ICE Setup.
f.
Dial 50 into TEST SELECT.
g.
Press and hold TEST until CAL message appears on display.
T0015DAA
Figure 2.
CAL Prompt Message.
h.
Release TEST.
i.
Wait for offset value to appear on display.
TM 9-2320-272-23-2
0197
0197-2
Back to Top
