INSTALLATION - Continued
58.
Install hose (Figure 28, Item 3) on water heater shutoff valve (Figure 28, Item 1) with clamp
(Figure
28,
Item
2).
59.
Install hose (Figure 28, Item 4) on water heater shutoff valve (Figure 28, Item 6) with clamp
(Figure
28,
Item
5).
60.
Install wire (Figure 28, Item 21) on alternator (Figure 28, Item 23) with washer (Figure 28, Item 20), lockwasher
(Figure 28, Item 19), and nut (Figure 28, Item 18).
61.
Install wire (Figure 28, Item 10) on alternator (Figure 28, Item 23) with washer (Figure 28, Item 11), lockwasher
(Figure 28, Item 12), and nut (Figure 28, Item 13).
62.
Install wire (Figure 28, Item 7) on alternator (Figure 28, Item 23) with lockwasher (Figure 28, Item 8) and screw
(Figure 28, Item 9).
63.
Install wire retaining strap (Figure 28, Item 14) on alternator (Figure 28, Item 23) with two lockwashers
(Figure
28,
Item
15) and screws (Figure 28, Item 16).
64.
Seal wires (Figure 28, Items 10 and 21) completely with adhesive sealant, and install terminal cover
(Figure
28, Item 17) on alternator (Figure 28, Item 23) with two screw assembled lockwashers
(Figure
28,
Item
22).
65.
Connect wire (Figure 28, Item 25) to connector (Figure 28, Item 24).
66.
Install tiedown strap (Figure 28, Item 26) around all wires.
TM 9-2320-272-23-2
0211
0211-50