INSTALLATION - Continued
26.
Install ground strap (Figure 23, Item 3) on air compressor (Figure 23, Item 1) with lockwasher
(Figure
23,
Item
2), washer (Figure 23, Item 4), lockwasher (Figure 23, Item 5), and screw
(Figure
23,
Item
6).
27.
Install ground strap (Figure 23, Item 10) and ground wire (Figure 23, Item 9) on air intake manifold
(Figure
23,
Item 7) with lockwasher (Figure 23, Item 11) and screw assembled washer (Figure 23, Item 8).
28.
Connect air line (Figure 23, Item 12) to fitting (Figure 23, Item 13).
29.
Install ground strap (Figure 23, Item 20) and wires (Figure 23, Items 21 and 24) on terminal post
(Figure
23,
Item 19) with washer (Figure 23, Item 23) and nut (Figure 23, Item 22).
30.
Install wires (Figure 23, Items 14 and 25) on starter solenoid (Figure 23, Item 18) with washer
(Figure
23,
Item
27) and nut (Figure 23, Item 26).
31.
Install wire (Figure 23, Item 15) on starter solenoid (Figure 23, Item 18) with clip (Figure 23, Item 17) and screw
(Figure 23, Item 16).
TM 9-2320-272-23-2
0211
0211-40