TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 443 of 1417

INSTALLATION - Continued

46.

Install emergency stop cable (Figure 26, Item 1) in swivel block (Figure 26, Item 10).

47.

Install connector (Figure 26, Item 12) on cable (Figure 26, Item 1) and tighten connector screw

(Figure

26,

Item

11).

48.

Install cable (Figure 26, Item 1) on clamp bracket (Figure 26, Item 9) with clamp (Figure 26, Item 7), washer

(Figure 26, Item 5), screw (Figure 26, Item 6), and nut (Figure 26, Item 8).

49.

Install wires (Figure 26, Items 13 and 14) on fuel shutoff solenoid (Figure 26, Item 2) with nut

(Figure

26,

Item

15).

50.

Install pump throttle lever (Figure 26, Item 3) on accelerator rod (Figure 26, Item 4) with screw

(Figure

26,

Item

27) and locknut (Figure 26, Item 26).

51.

Install pump throttle lever (Figure 26, Item 3) on link (Figure 26, Item 24) with screw (Figure 26, Item 25) and

locknut (Figure 26, Item 16).

52.

Install modulator cable (Figure 26, Item 19) on fuel primer pump bracket (Figure 26, Item 20) with shim

(Figure

26, Item 17), clamp (Figure 26, Item 22), two screws (Figure 26, Item 23), and nuts

(Figure

26,

Item

18).

53.

Connect return spring (Figure 26, Item 21) to link (Figure 26, Item 24) and fuel primer pump bracket

(Figure

26,

Item

20).

TM 9-2320-272-23-2

0211

0211-46