REMOVAL - Continued
18.
Remove o-rings (Figure 5, Items 11 and 12) from fuel injection pump (Figure 5, Item 1). Discard o-rings.
NOTE
Perform Steps (19) through (21) if installing fuel injection pump.
19.
Remove two screws (Figure 5, Item 5) and fuel shutoff lever (Figure 5, Item 6) from fuel injection pump
(Figure
5,
Item
1).
20.
Remove two screws (Figure 5, Item 4) and throttle lever (Figure 5, Item 3) from shaft (Figure 5, Item 2).
21.
Remove plug (Figure 5, Item 8), two copper washers (Figure 5, Item 9), and fitting (Figure 5, Item 7) from fuel
injection pump (Figure 5, Item 1). Discard copper washers.
TM 9-2320-272-23-2
0242
0242-8