TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 779 of 1417
INSTALLATION - Continued
18.
Install ground wire (Figure 5, Item 11) on frame (Figure 5, Item 13) and double check valve (Figure 5, Item 15)
with lockwasher (Figure 5, Item 12), washer (Figure 5, Item 10), screw (Figure 5, Item 9), and locknut
(Figure
5,
Item
14).
19.
Loosen two nuts on screws (Figure 5, Item 17) and slide stop plate (Figure 5, Item 18) upward.
20.
Install outrigger (Figure 5, Item 19) in wrecker body (Figure 5, Item 16) and slide stop plate (Figure 5, Item 18)
down. Stop plate must contact back of slot in top of outrigger.
21.
Tighten two nuts on screws (Figure 5, Item 17).
M10094DAA
5
9
10
11
12
13
14
15
3
2
1
7
8
16
17
19
18
20
6
4
Figure 5.
Fuel Tank Installation.
END OF TASK
TM 9-2320-272-23-2
0251
0251-10
Back to Top
