REMOVAL - Continued
5.
Remove nut (Figure 2, Item 4), screw (Figure 2, Item 1), and clamp (Figure 2, Item 3) from fuel return line
(Figure 2, Item 2).
6.
Remove nut (Figure 2, Item 8), screw (Figure 2, Item 5), and clamp (Figure 2, Item 7) from fuel supply line
(Figure 2, Item 6).
7.
Remove nut (Figure 2, Item 11) from screw (Figure 2, Item 9).
8.
Remove two clamps (Figure 2, Item 10) from fuel supply line (Figure 2, Item 6) and fuel return line
(Figure
2,
Item
2).
9.
Remove nut (Figure 2, Item 17), screw (Figure 2, Item 15), and two clamps (Figure 2, Item 16) from fuel supply
line (Figure 2, Item 6) and fuel return line (Figure 2, Item 2).
10.
Disconnect two tubing nuts (Figure 2, Item 18) and remove tee fitting (Figure 2, Item 19) and front half of fuel
supply line (Figure 2, Item 6) from rear half of fuel supply line (Figure 2, Item 6).
11.
Remove nut (Figure 2, Item 14), screw (Figure 2, Item 12), and clamp (Figure 2, Item 13) from fuel return line
(Figure 2, Item 2).
TM 9-2320-272-23-2
0254
0254-4