TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 836 of 1417
INSTALLATION (M939/A1)
NOTE
All male pipe threads must be wrapped with antiseize tape before installation.
If only the fuel filter element was changed, go to Step (5).
1.
Install adapter elbows (Figure 6, Items 7 and 10) on filter cover (Figure 6, Item 8) in directions noted
during
removal.
NOTE
Ensure drain valve port on tee faces down.
2.
Install tee (Figure 6, Item 3) on elbow (Figure 6, Item 7).
3.
Install drain valve (Figure 6, Item 6) and stud (Figure 6, Item 4) on tee (Figure 6, Item 3) and connect filter inlet
line (Figure 6, Item 5) to stud.
4.
Connect filter outlet line (Figure 6, Item 9) to elbow (Figure 6, Item 10) and attach filter cover
(Figure 6, Item 8) to mounting bracket (Figure 6, Item 1) with three screws (Figure 6, Item 11) and locknuts
(Figure
6,
Item
2).
9
M9702DAA
10
11
1
2
3
4
5
7
6
8
Figure 6.
Fuel Filter Installation.
TM 9-2320-272-23-2
0258
0258-9
Back to Top
