TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1307 of 1469
INSTALLATION
NOTE
Perform Step (1) for M931/A1/A2 and M932/A1/A2 models.
1.
Install fuel tank cap cover (Figure 2, Item 9) on carrier access step (Figure 2, Item 6) with two screws
(Figure 2, Item 10), washers (Figure 2, Item 11), and locknuts (Figure 2, Item 21).
2.
Install two step brackets (Figure 2, Item 19) on carrier access step (Figure 2, Item 6) with four screws
(Figure 2, Item 14) and locknuts (Figure 2, Item 13).
3.
Install carrier access step (Figure 2, Item 6) and two step brackets (Figure 2, Item 19) on carrier base
(Figure 2, Item 5) with four screws (Figure 2, Item 20) and locknuts (Figure 2, Item 15).
NOTE
•
Perform Step (4) for vehicles with top fill tank.
•
Vehicles may have one or two fuel cap covers. Perform Step (4) for both fuel cap covers.
4.
Lift fuel cap cover (Figure 2, Item 9), remove rags from fuel tank opening, and install chain and strainer
assembly (Figure 2, Item 8) and fuel cap (Figure 2, Item 7) on fuel tank (Figure 2, Item 12).
5.
Install fuel can bracket (Figure 2, Item 1) on carrier access step (Figure 2, Item 6) and carrier base
(Figure 2, Item 5) with six screws (Figure 2, Item 2), washers (Figure 2, Item 3), and locknuts
(Figure 2, Item 4).
6.
Install reflector bracket (Figure 2, Item 17) on carrier access step (Figure 2, Item 6) with two screws
(Figure 2, Item 18) and locknuts (Figure 2, Item 16).
TM 9-2320-272-23-3
0524
0524-4
Back to Top
