TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1297 of 1469
REMOVAL - Continued
10.
Install utility chain (Figure 2, Item 2) around upper carrier (Figure 2, Item 1) and attach to suitable lifting device.
11.
Lift carrier base (Figure 2, Item 3) from vehicle and position on four jack stands (Figure 2, Item 4).
12.
Remove utility chain (Figure 2, Item 2) from upper carrier (Figure 2, Item 1).
13.
Remove six locknuts (Figure 2, Item 7), washers (Figure 2, Item 8), screws (Figure 2, Item 11), and bracket
assembly (Figure 2, Item 10) from carrier step (Figure 2, Item 9) and carrier base (Figure 2, Item 3).
Discard
locknuts.
NOTE
Assistant will support access steps during Step (15).
14.
Remove eight locknuts (Figure 2, Item 6), screws (Figure 2, Item 5), and two carrier steps (Figure 2, Item 9)
from carrier base (Figure 2, Item 3). Discard locknuts.
M5081DAA
2
1
3
5
6
11
10
9
8
7
6
5
4
Figure 2.
Spare Tire Carrier and Toolbox Removal.
TM 9-2320-272-23-3
0523
0523-4
Back to Top
