TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 1389 of 1469

INSTALLATION - Continued

NOTE

Soak felt washers with oil before installation.

2.

Install wiper ring (Figure 5, Item 2), washer (Figure 5, Item 3), two felt washers (Figure 5, Item 4), and packing

retainer (Figure 5, Item 5) on crosstube (Figure 5, Item 1).

3.

Install inner bearing (Figure 5, Item 16) in spring seat (Figure 5, Item 15).

4.

Install grease seal assembly (Figure 5, Item 6) over inner bearing (Figure 5, Item 16) side of spring seat

(Figure

5, Item 15).

5.

Install spring seat (Figure 5, Item 15) on crosstube (Figure 5, Item 1).

6.

Install outer bearing (Figure 5, Item 14) in spring seat (Figure 5, Item 15).

7.

Install bearing adjusting nut (Figure 5, Item 13) on crosstube (Figure 5, Item 1).

TM 9-2320-272-23-3

0540

0540-6