TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1386 of 1469
REMOVAL - Continued
NOTE
Perform Step (7) only when bearing races must be removed because of cracked, pitted, or
scored condition, or if bearings are to be installed.
7.
Remove bearing races (Figure 2, Item 2) and (Figure 2, Item 3) from spring seat (Figure 2, Item 1).
M10309DAA
1
2
3
Figure 2.
Rear Spring Seat Removal.
END OF TASK
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound is flammable and toxic. Do not use near an open flame and
always have a fire extinguisher nearby when solvents are used. Use only in well-ventilated
places, wear protective clothing, and dispose of cleaning rags in approved container. Failure
to comply may result in damage to equipment, injury, or death to personnel.
1.
Clean all parts in solvent cleaning compound and allow to dry.
2.
Inspect all parts for cracks, pitting, or scoring. Replace parts as necessary if cracked, pitted, or scored.
END OF TASK
TM 9-2320-272-23-3
0540
0540-3
Back to Top
