TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 145 of 1469
INSTALLATION - Continued
77.
Connect wires (Figure 24, Items 1 and 3) on ether start fuel pressure switch (Figure 24, Item 2)
78.
Connect wire (Figure 24, Item 5) to engine temperature sending unit (Figure 24, Item 4).
79.
Install wire (Figure 24, Item 11) on fuel pump solenoid terminal (Figure 24, Item 13) with nut
(Figure
24,
Item
12).
80.
Connect fuel pressure transducer wires (Figure 24, Items 14 and 17).
81.
Connect tachometer pulse sender wires (Figure 24, Items 15 and 16).
82.
Install clamp (Figure 24, Item 9) on harness (Figure 24, Item 6) and install on intake manifold
(Figure
24,
Item
10) with washer (Figure 24, Item 8) and screw (Figure 24, Item 7).
TM 9-2320-272-23-3
0357
0357-44
Back to Top
