TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 535 of 1469

DISASSEMBLY

NOTE

Perform disassembly for M9272A2, M928A2, M934A2, and M935A2 models only.

1.

Straighten tabs on two universal plates (Figure 3, Item 3).

2.

Remove four screws (Figure 3, Item 2), two universal plates (Figure 3, Item 3), bearing caps

(Figure

3,

Item

1), and universal joint (Figure 3, Item 5) from center bearing propeller shaft

(Figure

3,

Item

4). Discard universal plates.

3.

Loosen dust seal (Figure 3, Item 8) on shaft (Figure 3, Item 7).

4.

Remove shaft (Figure 3, Item 7) from shaft (Figure 3, Item 9).

5.

Remove dust seal (Figure 3, Item 8) from shaft (Figure 3, Item 9).

6.

Remove grease fitting (Figure 3, Item 10) from yoke (Figure 3, Item 6).

TM 9-2320-272-23-3

0401

0401-6