TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 537 of 1469

ASSEMBLY

NOTE

Perform assembly for M9272A2, M928A2, M934A2, and M935A2 models only.

1.

Install grease fitting (Figure 4, Item 10) in yoke (Figure 4, Item 6).

NOTE

Apply light coat of GAA grease to dust seal and splines of shaft before installation.

2.

Install dust seal (Figure 4, Item 8) on splines of shaft (Figure 4, Item 9).

3.

Install shaft (Figure 4, Item 7) on shaft (Figure 4, Item 9).

4.

Tighten dust seal (Figure 4, Item 8) on shaft (Figure 4, Item 7).

5.

Install universal joint (Figure 4, Item 5) on center bearing propeller shaft (Figure 4, Item 4) with two bearing

caps (Figure 4, Item 1), universal plates (Figure 4, Item 3), and four screws (Figure 4, Item 2). Tighten four

screws to 32 to 40 lb-ft (43 to 54 N·m).

6.

Bend tabs on two universal plates (Figure 4, Item 3) against four screws (Figure 4, Item 2).

TM 9-2320-272-23-3

0401

0401-8