TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 533 of 1469

REMOVAL - Continued

NOTE

Perform Steps (10) through (14) for M927A2, M928A2, M934A2, and M935A2 models only.

10.

Remove eight locknuts (Figure 2, Item 9), screws (Figure 2, Item 7), and rear axle flange (Figure 2, Item 8)

from center bearing flange (Figure 2, Item 6). Discard locknuts.

11.

Remove eight locknuts (Figure 2, Item 13) and flange (Figure 2, Item 14) from transfer case brake drum studs

(Figure 2, Item 1). Discard locknuts.

12.

Remove two locknuts (Figure 2, Item 12), screws (Figure 2, Item 4), washers (Figure 2, Item 3), center bearing

(Figure 2, Item 11), forward-rear axle propeller shaft (Figure 2, Item 10), and vibration damper

(Figure

2,

Item

5) from bracket (Figure 2, Item 2). Discard locknuts.

13.

Remove locknut (Figure 2, Item 15), washer (Figure 2, Item 16), clamp (Figure 2, Item 17), spacer

(Figure

2,

Item

18), screw (Figure 2, Item 20), and clamp (Figure 2, Item 19) from bracket (Figure 2, Item 2)

and crossmember (Figure 2, Item 22). Discard locknut.

14.

Remove three locknuts (Figure 2, Item 24), washers (Figure 2, Item 23), screws (Figure 2, Item 21), and bracket

(Figure 2, Item 2) from crossmember (Figure 2, Item 22). Discard locknuts.

TM 9-2320-272-23-3

0401

0401-4